Canon VB-M700F - Manual (Page 43)

43
3
S
to
rage
S
erver
S
et
tin
g
s
You can configure the recording method and event
priority.
Display the [Storage Server Group Settings]
Dialog Box
The [Storage Server Group Settings] dialog box is
displayed.
(1) [Storage Server Group]
Display the Storage Server Group name.
(2) [Edit]
Change the name of Storage Server Group.
(3) [Recording Settings] tab
Make settings for recording files and notifications of
available disk space.
(4) [Events] tab
Configure the method for processing events for a
Storage Server.
(5) [OK] and [Cancel]
Close the dialog box.
Change the Storage Server Group Name
Configure the Recording Settings
Configure the recording settings, such as the maximum
recording file size.
(1) [Maximum File Size / Duration]
Specify the maximum size or the maximum recording
duration for the recording file.
You can set a maximum file size of 512 MB or 1024
MB, and a maximum recording duration of 1 to 24
hours.
(2) [Low Disk Space Warning Level]
Specify when to notify the user of low available disk
space as a percentage of the maximum disk usage.
(3) [Reduce recording frame rate when disk is under high
load]
Select the check box to decrease the frame rate
automatically when the system load is high.
(4) [OK] and [Cancel]
Close the dialog box.
• The maximum size is fixed at 1 GB (1024 MB) and the
maximum duration is fixed at 24 hours.
Configure a Storage Server Group
1 Click [Settings] > [Storage Server Group].
1 Click [Edit] to display the [Edit Storage Server Group
Name] dialog box.
(1)
(3) (2)
(4)
(5)
2 Change the Storage Server name and click [OK].
1 Click the [Recording Settings] tab.
2 Configure the recording settings.
3 Click [OK] to close the dialog box.
(2)
(1)
(3)
(4)