Appendix c: the parameter list, Axis 700 user’s manual – Axis Communications Axis Network Scan Server 700 User Manual
Page 87
Appendix C: The Parameter List
AXIS 700 User’s Manual
86
Retrieve Method
= None
Specifies from where the address book will be retrieved.
None, FTP or LDAP.
FTP Server
=
Specifies the name or IP address of the FTP server.
FTP User
=
Specifies the user name for logging on to the FTP server.
If left blank, the FTPDefaultUser will be used.
FTP Password
=
Specifies the password for logging on to the FTP server.
If left blank, the FTPDefaultPassword will be used.
FTP Directory
=
Specifies the directory on the FTP server where the file
is stored.
FTP File Name
=
Specifies the name of the file on the FTP server.
LDAP Server
=
Specifies the name or IP address of the LDAP server.
LDAP Port
=
Specifies the number of the TCP/IP port.
LDAP User
=
LDAP Password
=
LDAP Search Base
=
Specifies where to begin the search, e.g.
o=companyname, c=countrycode
LDAP Name Field
= cn
Specifies the name of the field that contains the
destination name.
LDAP Mail Field
Specifies the name of the field that contains the e-mail
address.
LDAP Filter
=
Specifies an LDAP filter to reduce the length of the
destination list, e.g. (givenName=*)
[International]
Language
=U.S. English
Specifies the language used on the AXIS 700 message
display. Valid values are U.S. English, German, French and
Spanish.
Unit
= Inches
Specifies the metric system used, e.g. for paper sizes.
Valid values are Inches or Centimeters.
[SMTP]
Primary Mail Server
=
Specifies the name or IP address of the SMTP mail
server that provides the e-mail facilities for the AXIS
700. If you are using DNS, specify the name. Otherwise,
specify the IP address. E.g. mail or mail.domain.com or
192.36.253.80.
Secondary Mail Server
=
Specifies the name or IP address of the secondary mail
server, should the primary be unavailable or
disconnected.
Connection Timeout
= 10
Connection timeout.
[Profiles]
Profiles
= 8
Profiles0
= Profile-Text
[Profile-Text]
Note that the parameters in this list applies to all
profiles parameters.
Parameter name
Value
Description