Axis Communications Axis Network Scan Server 700 - Manual (Page 18)

AXIS 700 User’s Manual Section 2: Basic Installation 17
During the self test, this message will appear on the display:
where x.xx is the software version number.
Assigning an IP Address
To establish communication with the TCP/IP environment, you must
assign an IP address and optionally make up a unique host name for
your AXIS 700. The IP address can be set from the AXIS 700 control
panel, or using any of the conventional methods: DHCP, ARP, RARP
or BOOTP. Choose your preferred method.
On Windows NT networks, DHCP is the recommended method
since it allows a number of parameters to be set automatically,
provided the DHCP server has been configured to do so.
On Macintosh networks, you can use DHCP or the control panel.
Refer to “Other Methods for Downloading the IP Address” on page 20
for more information on the DHCP, ARP, RARP and BOOTP
methods.
Control Panel To set the IP address from the control panel, follow these steps:
1. Acquire an unused IP address from your Network Administrator.
2. Power up the AXIS 700. Press Menu when this display appears:
3. After a few seconds this display will be shown:
$;,6
9HUVLRQ [[[
$;,6
9HUVLRQ [[[
,3 DGGUHVV