Axis Communications Axis Network Scan Server 700 - Manual (Page 23)

Section 2: Basic Installation AXIS 700 User’s Manual 22
Using DHCP Follow these steps to use the DHCP method:
1. Edit or create a scope in the DHCP manager of the DHCP
daemon. For Windows NT servers, refer to the “Windows NT
Resource Kit” on how to do this. The entries made in this scope
typically include the following parameters:
• Range of IP addresses
• Subnet mask
• Default router IP address
• Lease duration
• Mail server IP address
• DNS server IP address
• Domain name
• NTP server IP address
2. Activate the scope.
In the AXIS 700 configuration file, DHCP is enabled by default. The
IP address and all the other settings will be downloaded automatically.
You do not need to restart the AXIS 700.