Axis Communications Axis Network Scan Server 700 User Manual
Page 19
Section 2: Basic Installation
AXIS 700 User’s Manual
18
4. Press Enter
to edit the IP address:
5. Press Menu
to move through the digits and highlight each
digit, one at a time.
6. Use
to increase or decrease each highlighted digit, as
required.
7. Press Enter
to confirm the changes.
8. Press Menu
to display the default router address:
9. Press Enter
to edit the default router address:
10. To change the value, repeat steps 5-7 above.
11. Press Menu
to display the subnet mask:
12. Press Enter
to edit the subnet mask:
13. To change the value, repeat steps 5-7 above.
14. Press Menu
to display the node address. This address is not
editable. The node address should equal the AXIS 700 serial number
found on the underside label of the unit.
(GLW ,3 DGGUHVV
'HIDXOW URXWHU
(GLW URXWHU
1HW PDVN
(GLW QHW PDVN