Brother DCP-7010L - Manual (Page 79)

Network Scanning (For Windows ® )
6 - 6
6
Scan to File
When you select Scan to File you can scan a black and white (or colour document) and send it directly to a
PC you designate on your network. The file will be saved in the folder and file format that you have configured
in ControlCenter2.0 on the designated PC. You can change the Scan configuration. (See File on page 3-6.)
1
Load your document.
2
Press Scan.
3
Press ▲ or ▼ to select Scan to File.
Press Menu/Set.
4
Press ▲ or ▼ to select the destination PC you want to send to.
Press Menu/Set.
If the LCD prompts you to enter a Pin number, enter the 4-digit Pin number for the destination PC on the
control panel.
Press Menu/Set.
The machine will start the scanning process.
Note
■
Max. 25 clients can be connected to one machine on a Network. For example, if 30 clients try to connect
at a time, 5 clients will not be shown on the LCD.
■
MFC-7225N is not able to scan colour documents.