Brother MFC-425CN - Manual (Page 26)

3 - 6 FRONT PANEL SETUP
NC9100h_FM6.0
(For DCP-315CN)
1 Press Menu .
2 Press ▲ or ▼ to select 3.LAN .
Press Set .
3 Press ▲ or ▼ to select 1.Setup TCP/IP .
Press Set .
4 Press ▲ or ▼ to select 2.IP Address .
Press Set .
5 Press ▲ or ▼ to select 1 to change.
Press Set .
6 Press ▲ repeatedly to enter the first three-digit number for the
IP address.
Press
Set .
Repeat this step until you have entered the fourth three-digit
number to complete the IP address.
7 Press Stop/Exit .
Each number can also be increased / decreased by holding
down
▲ or ▼ .