Brother MFC-425CN - Manual (Page 21)

FRONT PANEL SETUP 3 - 1
3
NC9100h_FM6.0
3
Front Panel Setup
LAN Main Setup Menu
You can connect your machine into the network to use the Network
Scanner, Network Printer and Network PhotoCapture Center.
To use all the network functions, you can set up your machine using
the control panel LAN menu.
The LAN menu selections allow you to setup the Brother machine for
your network configuration. Press
Menu/Set , then press the
appropriate number, 5 for LAN for example. In the LAN Main Setup
menu, there are two main selections: Setup TCP/IP and Setup
Misc. Proceed to the menu selection you wish to configure. (See
Appendix of the User’s Guide for the LAN menu options.)
Please note that the machine is supplied with the BRAdmin
Professional Windows
® software, which can be used to configure
many aspects of the network.
You can also set up the LAN settings using BRAdmin. (See
TCP/IP Configuration on page 2-1 or visit at:
http://solutions.brother.com)