Brother MW-260 - Manual (Page 33)

16
Using the paper guide
Installing the paper guide
*
The paper guide (PG-200) is sold separately.
1
Position the paper guide so that the paper check
window is visible.
2
Align the tabs on the left and right sides with the
slots, and then press down until they snap into
place.
Removing the paper guide
1
Open the paper cassette cover.
2
One side at a time, use a standard (slotted)
screwdriver to unhook the paper guide tabs near
the areas shown by 1 below.
#
The paper guide is not intended to be frequently
installed and removed. Frequently installing and
removing the paper guide may damage the
printer or cause the cover or paper guide to warp.
①