Brother HL-4000CN - Manual (Page 58)

7-3
How to Select the Print Server (AppleTalk)
1. Open the Chooser from the Apple Menu on the Macintosh
Click the AdobePS icon and then select BRN_xxxxxxP1_AT. (xxxxxx are
the last six digits of the Ethernet address.)
2. Close the Chooser. Setup is now complete.
1. Open the Macintosh HD icon.
2. Open the Applications folder.
3. Open the Utilities folder.
4. Open the Print Center icon.
5. Click the Add Printer button.
6. Select "Apple Talk".
7. Select BRN_xxxxxx_P1_AT and then click the Add button.
8. Select "Quit Print Center" from the Print Center menu. The setup is now
complete.
If you cannot see the print server, first make sure that your cabling is correct and that
you have enabled EtherTalk from your Macintosh Network Control Panel. You may
also need to force the print server into the correct AppleTalk zone using the
BRAdmin application or a web browser.