Brother HL-4000CN - Manual (Page 50)

6-3
Interface
The following frame types are supported:
Ethernet II specifications
IEEE802.3 specifications
IEEE802.2 specifications
SNAP specifications
The frame types are automatically detected. However, if you wish to select a specific
frame type, use the BRAdmin software, the control panel, a web browser or the
BRAdmin Professional software.
Configuring NetWare Systems
1. Start the BRAdmin software and select the printer icon you wish to
configure Click the Configure Device icon.
2. Enter the password and click OK. (The default password is "access".)
3. Select the Netware tab.
4. Select the Operating Mode you want to use.
For directory service:
When you select NDS Queue Server or NDS Remote Printer see "Configuring in
Directory Service (NDS)" in this chapter.
For bindery service:
When you select Bindery Queue Server or Bindery Remote Printer see "Configuring
in Bindery Service", in this chapter.