Pc fax receive, Changing the destination pc – Brother MFC-5860CN User Manual

Page 72

Chapter 9

PC Fax Receive

If you turn on the PC-Fax Receive feature
your machine will store received faxes in
memory and send them to your PC
automatically. You can then use your PC to
view and store these faxes.

Even if you have turned off your PC (at night
or on the weekend, for example), your
machine will receive and store your faxes in
its memory. The LCD will show the number of
stored faxes received, for example:
PC Fax Msg:001
When you start your PC and the PC-FAX
Receiving software runs, your machine
transfers your faxes to your PC automatically.

To transfer the received faxes to your PC you
must have the PC-FAX Receiving software
running on your PC. (For details, see PC-FAX
receiving in the Software User’s Guide on the
CD-ROM.)

If you choose Backup Print:On the
machine will also print the fax.

Press Menu, 2, 5, 1.

Remote Fax Opt
1.Fwd/Page/Store

Press a or b to choose
PC Fax Receive.
Press OK.

Press a or b to choose or the
PC you want to receive.
Press OK.

Press a or b to choose
Backup Print:On or
Backup Print:Off.
Press OK.

Press Stop/Exit.

Note

• PC Fax Receive is not supported in the

Mac OS

• Before you can set up PC Fax Receive

you must install the MFL-Pro Suite
software on your PC. Make sure your PC
is connected and turned on. (For details
see PC-FAX receiving in the Software
User’s Guide on the CD-ROM.)

• If you get an error message and the

machine cannot print the faxes in memory,
you can use this setting to transfer your
faxes to your PC. (For details, see Error
messages on page 105.)

• When PC Fax Receive is turned on only

black & white faxes can be received into
the memory and sent to the PC. Color
faxes will be received in real time and
printed in color.

Changing the destination PC