Brother MFC-5860CN - Manual (Page 131)

Troubleshooting and Routine Maintenance
115
Brother strongly recommends that you do
not refill the ink cartridges provided with
your machine. We also strongly
recommend that you continue to use only
Genuine Brother Brand replacement ink
cartridges. Use or attempted use of
potentially incompatible ink and/or
cartridges in the Brother machine may
cause damage to the machine and/or may
result in unsatisfactory print quality. Our
warranty coverage does not apply to any
problem that is caused by the use of
unauthorized third party ink and/or
cartridges. To protect your investment and
obtain premium performance from the
Brother machine, we strongly recommend
the use of Genuine Brother Supplies.
Cleaning the outside of the
machine
B
CAUTION
Use neutral detergents. Cleaning with
volatile liquids such as thinner or benzine
will damage the outside surface of the
machine.
DO NOT use cleaning materials that
contain ammonia.
DO NOT use isopropyl alcohol to remove
dirt from the control panel. It may crack the
panel.
Clean the outside of the machine as
follows:
B
a
Pull the paper tray (1) completely out of
the machine.
b
Wipe the outside of the machine with a
soft cloth to remove dust.
c
Remove anything that is stuck inside the
paper tray.
d
Lift the output paper tray cover and wipe
the inside and outside of the paper tray
with a soft cloth to remove dust.
e
Close the output paper tray cover and
put the paper tray firmly back in the
machine.
1