Brother MFC-5860CN - Manual (Page 24)

Chapter 1
8
Note
Most of the illustrations in this User’s Guide show the MFC-5460CN.
1 Fax keys:
„ Hook
Press before dialing if you want to make
sure a fax machine will answer, and then
press Black Start or Color Start.
Also, press this key after picking up the
handset of an external telephone during the
F/T double/pseudo-ring.
„ Redial/Pause
Redials the last number called. It also
inserts a pause when programming quick
dial number.
„ Resolution
Lets you temporarily change the resolution
when sending a fax.
2 Copy keys (Temporary settings):
„ Options
Lets you temporarily change multiple copy
settings.
„ Quality
Lets you temporarily change the quality
setting.
„ Enlarge/Reduce
Lets you temporarily enlarge or reduce
copies depending on the ratio you choose.
„ Paper Type (MFC-5460CN only)
You can choose which type of paper you
want to use for the next copy.
„ Tray Select (MFC-5860CN only)
You can choose which tray you want to use
for the next copy.
3 Dial Pad
Use these keys to dial telephone and fax
numbers and as a keyboard for entering
information into the machine.
(Canada only)
The # key lets you temporarily switch the
dialing mode during a telephone call from
Pulse to Tone.
4 Mode keys:
„ Fax
Lets you access Fax mode.
„ Scan
Lets you access Scan mode.
„ Copy
Lets you access Copy mode.
„ PhotoCapture
Lets you access PhotoCapture Center
®
mode.
5 Menu keys:
„ Menu
Lets you access the Menu to program your
settings in the machine.
„ a Search/Speed Dial
Lets you look up and dial numbers that are
stored in the memory.
„ Volume keys
d c
In Fax mode, you can press these keys to
adjust the ring volume.
„ d
Press to scroll backward to a menu
selection.
„ a or b
Press to scroll through the menus and
options.
„ Clear/Back
Press to cancel the current setting.
„ OK
Lets you store your settings in the machine.
6 Start keys:
„ Color Start
Lets you start sending faxes or making
copies in full color. Also lets you start a
scanning operation (in color or black &
white, depending on the scanning setting in
the ControlCenter software).
„ Black Start
Lets you start sending faxes or making
copies in black & white. Also lets you start
a scanning operation (in color or black &
white, depending on the scanning setting in
the ControlCenter software).