Brother MFC-5860CN - Manual (Page 35)

Loading documents and paper
19
2
Note
When you put the paper into the paper
tray, slide the paper in making sure that it
touches the paper length guide (1) first,
then gently lower the other end of the
paper.
f
Gently adjust the paper side guides with
both hands to fit the paper.
Make sure the paper side guides touch
the sides of the paper.
Note
Be careful that you do not push the paper
in too far; it may lift at the back of the tray
and cause feed problems.
g
Close the tray cover.
h
Push the paper tray firmly back into the
machine.
Note
If you are using Auto Select, after refilling
the paper tray you should open and close
the scanner cover to reset the machine.
Loading envelopes and post cards
2
Loading envelopes
2
„ Use envelopes that weigh from 20 to 25 lb
(75 to 95 g/m
2
).
„ Some envelopes need margin settings to
be set in the application. Make sure you
do a test print first.
CAUTION
Do not use any of the following types of
envelopes, as they will cause paper feed
problems:
• If they are of a baggy construction.
• That are embossed (have raised writing
on them).
• That have clasps or staples.
• That are pre-printed on the inside.
Occasionally you may experience paper feed
problems caused by the thickness, size and
flap shape of the envelopes you are using.
1
Glue Double flap