Brother MFC-5860CN - Manual (Page 127)

Troubleshooting and Routine Maintenance
111
d
Remove the Jam Clear Cover (1) from
the back of the machine. Pull the
jammed paper out of the machine.
e
Put the Jam Clear Cover back on.
Make sure the cover is set properly.
f
Lift the scanner cover (1) from the front
side of the machine until it locks
securely into the open position.
Make sure that there is no jammed
paper left in the corners of the machine.
Note
If the paper is jammed under the print
head, unplug the machine from the power
source, and then move the print head to
take out the paper.
g
Lift the scanner cover to release the
lock (1). Gently push the scanner cover
support down (2) and close the scanner
cover (3).
1
1