Brother MFC-820CW - Manual (Page 42)

For Network Users
40
How to set the machine’s
network settings to wireless
LAN or wired LAN
To connect your Brother machine to a wireless or
wired network you must configure the machine from
the machine’s control panel for the network type you
are using.
For wireless LAN
On your machine, press Menu.
Press a or b to choose LAN and press OK.
Press a or b to choose Network I/F and press
OK.
Press a or b to choose WLAN and press OK.
Press 1 for Yes to accept the change.
The wired network interface will become onactive with
this setting.
It will take about a minute for the LAN menu on the
LCD to become available again.
For wired LAN
On your machine, press Menu.
Press a or b to choose LAN and press OK.
Press a or b to choose Network I/F and press
OK.
Press a or b to choose Wired LAN and press OK.
Press 1 for Yes to accept the change.
The wireless network interface will become inactive
with this setting.
It will take about a minute for the LAN menu on the
LCD to become available again.