Brother Innov-is 6000D - Manual (Page 32)

31
d
After the pattern is sewn, remove the fabric
from the frame, and then measure the
distance that the pattern is to be slid.
a Vertical: 32.8 mm
b Horizontal: 42.8 mm
■ Trial Sewing
Sew trial embroidery to check that the pattern will be
slid the correct distance.
a
Select the pattern, and then continue to the
sewing screen.
b
Press in the sewing screen.
c
Embroider the first pattern.
d
Refer to steps
g
through
j
of “Practice
(Connecting Three Patterns)” to select the
next pattern.
e
Select the reference edge and reference point
for connecting this pattern to the next one,
and then press
.
a Reference edge and reference point of first pattern
a