Brother Innov-is 6000D - Manual (Page 23)

22
Changing the Position of a Sticker
If the selected pattern or positioning stickers for
connecting the next pattern do not easily fit in the
embroidering area, follow the on-screen instructions
that appear after step
o
on page 18 in order to move
the positioning stickers.
For an example, the on-screen instruction appears
when you use the embroidery frame with a size of 10
cm × 10 cm (4 inches × 4 inches) to connect patterns as
shown below.
a Pattern1X.pes
b Pattern2X.pes
a
Refer to steps
a
through
o
of “Practice
(Connecting Three Patterns)” using the
embroidery frame with a size of 10 cm × 10
cm (4 inches × 4 inches) to embroider the first
pattern and to connect the second pattern.
Note
• When referring to steps a through o , make sure
you change the reference edge and reference point
to reflect this exercise.