Brother Innov-is 6000D - Manual (Page 22)

21
w
Select the connecting position for the third
pattern, and then press
. In this
example, we will select the right point of the
top edge for the third pattern.
• Pattern rotates automatically when corner
position is selected.
a Reference edge and reference point
b Second pattern (2)
c Third pattern (3)
→ Message appears on screen and carriage will move
after pressing .
x
Follow the on-screen instructions to perform
steps
m
through
r
.
y
Lower the presser foot, and then embroider
the third pattern.
→ When embroidering is finished, the following
message appears. When finished connecting
patterns, press .
→ After embroidering is finished,
is no longer
highlighted or located at the top right of LCD screen.
The three patterns have been connected.
Press to clear the pattern.
b
a
c