Brother Innov-is 6000D - Manual (Page 11)

10
c
Use to select the needle position that
will align with the thread mark at the end of
previous embroidery. For this example, align
the needle position with the upper center of
the next pattern. When you are finished, press
.
d
Use to align the needle position with
the point of the thread mark.
a Needle position
e
After aligning the needle position for the
beginning of embroidering, remove the
thread mark.
Note
• After turning the handwheel to check the needle
position, press the “Needle Position” button to raise
the needle.
Note
• Remove the thread mark before starting to
embroider. Otherwise, the thread mark stitching may
be combined with the pattern stitching and become
difficult to remove.
a