Manual cutting, Adjusting the label length, Manual cutting adjusting the label length – Brother PT-2700 User Manual
Page 70: Justing the label lengt, D 64
LABEL PRINTING
64
Manual Cutting
When using Fabric Iron-On Tapes or Extra Strength Adhesive Tapes, set "On" for
Manual Cutting before printing. After printing, remove the tape cassette from the
machine and use scissors to cut the tape.
Press the
key to display the setup menu, select
"Manual Cutting" using the or keys, and then
press the
or key.
Select the value by using the or keys.
Press the
or key to apply the setting.
You can adjust the length of the printed label in levels of -5 to +5.
Press the
key. The current settings are
displayed.
Select "Adjust Length" by using the or keys, and
then set the value by using the or keys.
Press the
or key to apply the setting.
Manual Cutting
1
2
3
• Press the
key to return to the previous step.
• Press the
key to set the value to default setting (“Off”).
Adjusting the Label Length
1
2
3
• Press the
key to return to the previous step.
• Press the
key to set the value to default setting.
• Approximately 1% of the total label length will be adjusted by 1 level.