Brother PT-2700 - Manual (Page 26)

20 Turning Power On/Off
GETTING STARTED
Press the key to turn the P-touch labeler on.
Press the key again to turn the P-touch labeler off.
z
Auto Power-Off Time
z
Turning Power On/Off
• Your P-touch labeler has a power saving function that automatically turns itself off if no key
is pressed within a certain time under certain operating conditions. Refer to the Auto Power-
Off Time table below for details.
• If the batteries are installed or the P-touch labeler is connected to an electrical outlet by the
AC adapter, the previous session’s information is displayed when the power is turned on.
P-touch labeler only Connected to PC
With AC adapter 8 hours 8 hours
With battery 5 minutes
5 minutes with no operation.
1 hour after printing from PC.