Brother PT-2700 User Manual

Page 50

EDITING A LABEL

Using Auto-Format Layouts

Select Print using the or keys and then press the

or to print the label.

• Select "Edit" to change the text data or style settings.
• Select "Save" to store the label in a file memory.
• Select "Quit" to exit the Auto-Format function.
• Select "Change Layout" to use a different layout.

• Press the

key to return to the previous step.

• Refer to the Block Layouts table for a list of available block layouts.
• The “Clear All Text?” message is displayed when the

key is pressed while holding down

key. Press the

or key to delete all text, or press the

key to not delete the text.

• To print multiple copies, sequentially numbered copies, or a mirror image of the label, with

the print menu displayed hold down the

key and press the

key to display the Print

Options menu.

• If the width of the current tape cassette does not match the set width for the selected layout,

an error message is displayed when you try to print the label. Press the

key or any other

key to clear the error message, and insert a tape cassette of the correct width.

• If the number of characters entered exceeds the limit, an error message is displayed when tthe

or key is pressed. Press the

key or any other key to clear the error message, and

edit the text using fewer characters.

• When using the Auto-Format function the label is cut with a margin on the left and right ends

regardless of the current Tape Cutting Option setting (refer to page 62).

This manual is related to the following products:

PT-2710