Brother DCP-375CW - Manual (Page 53)

PhotoCapture Center
®
: Printing photos from a memory card
41
5
Scan to a memory card
5
You can scan black & white and color
documents into a memory card.
Black and white documents will be stored in
PDF (*.PDF) or TIFF (*.TIF) file formats.
Color documents may be stored in PDF
(*.PDF) or JPEG (*.JPG) file formats. The
default setting is Color 150 dpi and the
default file format is PDF. The machine
automatically creates file names based on
the current date. (For details, see the Quick
Setup Guide.) For example, the fifth image
scanned on July 1, 2009 would be named
07010905.PDF. You can change the color
and quality.
a
Insert a Memory Stick™, Memory Stick
PRO™, SD, SDHC, xD-Picture Card™
into your machine.
IMPORTANT
DO NOT take out the memory card while
Photo Capture is blinking to avoid
damaging the card or data stored on it.
b
Load your document.
c
Press (Scan).
d
Press a or b to choose
Scan to Media.
Do one of the following:
„ To change the quality press OK and
go to step e.
„ To start scanning press Black Start
or Color Start.
e
Press a or b to choose the quality, and
then press OK. (See Changing the
image quality on page 41.)
Do one of the following:
„ To change the file type, go to step f.
„ To start scanning press Black Start
or Color Start.
f
Press a or b to choose the file type and
then press OK. (See Changing the
black & white file format on page 42 and
Changing the color file format
on page 42.)
Press Black Start or Color Start.
Changing the image quality
5
a
Press Menu.
b
Press a or b to choose
2.PhotoCapture.
Press OK.
c
Press a or b to choose
0.Scan to Media.
Press OK.
d
Press a or b to choose 1.Quality.
Press OK.
e
Press a or b to choose
Color 150 dpi, Color 300 dpi,
Color 600 dpi, B/W 200x100 dpi
or B/W 200 dpi.
Press OK.
f
Press Stop/Exit.
Quality Selectable File
Format
Color 150 dpi JPEG / PDF
Color 300 dpi JPEG / PDF
Color 600 dpi JPEG / PDF
B/W 200x100 dpi TIFF / PDF
B/W 200 dpi TIFF / PDF