Brother DCP-375CW - Manual (Page 51)

PhotoCapture Center
®
: Printing photos from a memory card
39
5
Sharpness
5
You can enhance the focus of an image by
adjusting the sharpness.
a
Press Menu.
b
Press a or b to choose
2.PhotoCapture.
Press OK.
c
Press a or b to choose 5.True2Life.
Press OK.
d
Press a or b to choose True2Life:On
(or True2Life:Off).
Press OK.
„ If you choose True2Life:Off,
then go to step g.
e
Press a or b to choose 4.Sharpness.
Press OK.
f
Press a to increase the sharpness or
press b to decrease the sharpness.
Press OK.
g
Press Stop/Exit.
Color Density
5
You can adjust the total amount of color in the
image to improve a washed out or weak
picture.
a
Press Menu.
b
Press a or b to choose
2.PhotoCapture.
Press OK.
c
Press a or b to choose 5.True2Life.
Press OK.
d
Press a or b to choose True2Life:On
(or True2Life:Off).
Press OK.
„ If you choose True2Life:Off,
then go to step g.
e
Press a or b to choose
5.Color Density.
Press OK.
f
Press a to increase the amount of color
or press b to decrease the amount of
color.
Press OK.
g
Press Stop/Exit.
Note
Choosing White Balance, Sharpness, or
Color Density will make printing time
slower.