Brother DCP-375CW - Manual (Page 38)

Chapter 4
26
To enlarge or reduce the next copy follow the
instructions below:
a
Load your document.
b
Press Enlarge/Reduce.
c
Do one of the following:
„ Press a or b to choose the
enlargement or reduction ratio you
want. Press OK.
„ Press a or b to choose
Custom(25-400%). Press OK.
Press a or b repeatedly to enter an
enlargement or reduction ratio from
25% to 400%. Press OK.
d
Press Black Start or Color Start.
Note
• Page Layout is not available with
Enlarge/Reduce.
• Fit to Page does not work properly
when the document on the scanner glass
is skewed more than 3 degrees. Using the
document guidelines on the left and top,
place your document in the upper left
hand corner, with the document face down
on the scanner glass.
Making N in 1 copies or a
poster (Page Layout)
4
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
You can also produce a poster. When you
use the poster feature your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster.
IMPORTANT
• Make sure paper size is set to Letter or
A4.
• You cannot use the Enlarge/Reduce
settingswith the N in 1 and Poster
features.
• N in 1 color copies are not available.
• (P) means Portrait and (L) means
Landscape.
• You can only make one poster copy at a
time.
a
Load your document.
b
Enter the number of copies you want.
c
Press Copy Options and a or b to
choose Page Layout.
Press OK.
Press
and then a or b to
choose
Page Layout
Off(1 in 1)
2 in 1 (P)
2 in 1 (L)
4 in 1 (P)
4 in 1 (L)
Poster(3 x 3)