Brother HL-3140CW - Manual (Page 16)

Configuring your machine for a wireless network (For HL-3140CW, HL-3150CDW and HL-3170CDW)
10
3
Confirm your network environment
3
Connected to a computer with a WLAN access point/router in the network
(Infrastructure mode)
3
1 WLAN access point/Router
1
1 If your computer supports Intel ® MWT (My WiFi Technology), you can use your computer as a WPS (Wi-Fi Protected Setup) supported access
point.
2 Wireless network machine (your machine)
3 Wireless capable computer connected to the WLAN access point/router
4 Wired computer which is not wireless capable connected to the WLAN access point/router with a
network cable
Configuration method
3
The following instructions will offer four methods for configuring your Brother machine in a wireless network
environment. Choose the method you prefer for your environment.
 Wireless configuration temporarily using a USB cable (Recommended)
See Wireless configuration temporarily using a USB cable (Recommended) on page 12.
 Wireless configuration using the Setup Wizard from the control panel
See Configuration using the machine’s control panel Setup Wizard on page 17.
 One push wireless configuration using WPS (Wi-Fi Protected Setup™) or AOSS™
See One push configuration using WPS (Wi-Fi Protected Setup) or AOSS™ on page 26.
 PIN Method wireless configuration using WPS
See Configuration using the PIN Method of WPS (Wi-Fi Protected Setup) on page 28.
2
1
4
3