Brother MFC-9330CDW - Manual (Page 2)

2
WARNING
• Plastic bags are used in the packing of your machine. Plastic bags are not toys. To avoid the danger
of suffocation, keep these bags away from babies and children, and dispose of them correctly.
• This machine is heavy and weighs more than 44.1 lb. (20.0 kg). To prevent possible injuries, at least
two people should lift the machine. One person should hold the front of the machine, and one person
should hold the back, as shown in the illustration below. Be careful not to trap your fingers when you
put the machine down.
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injuries.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injuries.
NOTE
• Keep a minimum gap around the machine as shown in the illustration.
• The components included in the box may differ depending on your country.
• We recommend that you save the original packaging.
• If for any reason you must ship your machine, carefully repack the machine in the original packaging to avoid
any damage during transit. The machine should be adequately insured with the carrier. For details on how
to repack the machine, see Advanced User's Guide: Packing and shipping the machine.
• Illustrations in this Quick Setup Guide are based on the MFC-9340CDW.
• The interface cable is not a standard accessory. Buy the appropriate interface cable for the connection you
want to use (USB or Network (MFC-9330CDW / MFC-9340CDW)).
USB cable
• We recommend using a USB 2.0 cable (Type A/B) that is no longer than 6 feet (2 meters).
• DO NOT connect the interface cable at this time. Connecting the interface cable is done during the MFL-Pro
Suite installation process.
Network cable (MFC-9330CDW / MFC-9340CDW)
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet
Network.
150 mm
(6.0 in.)
400 mm (15.70 in.)
150 mm
(6.0 in.)
150 mm
(6.0 in.)