Brother HL-3045CN - Manual (Page 5)

5
d
Put paper in the tray, and make sure that the
paper is below the maximum paper mark
a .
The side to be printed on must be face down.
e
Put the paper tray firmly back in the printer.
Make sure that it is completely inserted into the
printer.
5
Print a test page
a
Make sure that the printer power switch is off.
b
Connect the AC power cord to the printer.
c
Plug the AC power cord into an AC power
outlet. Turn on the printer power switch.
d
After the printer has finished warming up, the
LCD will show Ready.
IMPORTANT
Make sure the paper guides touch the sides of
the paper so it will feed properly.
IMPORTANT
DO NOT connect the interface cable yet.
㻡