Brother HL-3045CN - Manual (Page 18)

18
Other Information
CAUTION
Avoid placing your product in a high-traffic area. If you must place it in a high-traffic area, ensure that
the product is in a safe location where it cannot be accidentally knocked-over, which could cause injury
to you and serious damage to the product. Also ensure that cords are secured so as not to pose a
tripping hazard. DO NOT place this product on an unstable cart, stand, or table. The product is heavy
and may fall, causing injury to you, and serious damage to the product.
To use the product safely
Please keep these instructions for later reference and read them before attempting any maintenance. If
you do not follow these safety instructions, there is a possibility of a fire, electrical shock, burn or
suffocation.
WARNING
ELECTRICAL HAZARDS
Failure to follow the warnings in this section may create the risk of an electrical shock. In addition, you
could create an electrical short, which may create the risk of a fire.
• There are high voltage electrodes inside the product. Before you access the inside of the product,
including for routine maintenance such as cleaning, make sure you have unplugged the power cord
from the AC power outlet, as well as any Ethernet (RJ-45) cable from the product. Never push objects
of any kind into this product through cabinet slots, since they may touch dangerous voltage points or
short out parts.
IMPORTANT
• DO NOT place your product next to devices that contain magnets or generate magnetic fields. Doing
so may interfere with the operation of the product, causing print quality problems.
• DO NOT place your product next to sources of interference, such as speakers or the base units of
non Brother cordless telephones. Doing so may interfere with the operation of the product’s
electronic components.
• DO NOT connect your product to an AC power outlet controlled by wall switches or automatic timers.
Disruption of power can delete information from the product’s memory.
• DO NOT connect your product to an AC power outlet on the same circuit as large appliances or other
equipment that requires a significant amount of electricity to operate. Operating this product in
conjunction with the other product(s) could create an overvoltage, tripping your circuit breaker or
blowing your fuse.