For ad-hoc mode, 3for ad-hoc mode – Brother MFC-9320CW User Manual
Page 37
Configuring your machine for a wireless network (For MFC-9320CW)
26
3
For Ad-hoc mode
3
a
Confirm your network environment. See page 27.
b
Confirm your wireless network setup method. See page 28.
c
Configure your machine for a wireless network. See page 31.
Wireless configuration and installing drivers and software have been completed.
Ad-hoc mode
Connected to a wireless capable computer without
an access point
or
Infrastructure mode
See
Connected to a computer with an access point
Using the Setup Wizard from the control panel (Recommended)
Installing drivers and software (See the Quick Setup Guide)
This manual is related to the following products: