Brother MFC-9320CW - Manual (Page 160)

Troubleshooting
149
14
Network print software installation problems
14
The Brother print server is not found during the setup of the network print software or from the
installation of the printer driver of the Brother machine in Windows
®
.
The Brother print server is not found using the Simple Network Configuration capabilities of
Mac OS X.
14
 For a network with an Ethernet cable connection
Make sure you have completed the IP address setting of the Brother print server according to Chapter 2
of this User’s Guide before installing the network print software or printer driver.
 For a wireless network
Make sure you have completed the IP address setting and wireless network settings of the Brother print
server according to Chapter 3 of this User’s Guide before installing the network print software or printer
driver.
Check the following:
a Make sure that the machine is powered on, is on-line and ready to print.
b Check the connection status for your network.
For wired network users:
14
Check to see if there is any LED activity. Brother print servers have two LEDs on the back panel of the
machine. The upper orange LED shows Speed status. The lower green LED shows Link/Activity
(Received/Transmit) status.
 The upper LED is orange: The Speed LED will be orange if the print server is connected to a
100BASE-TX Fast Ethernet network.
 The upper LED is off: The Speed LED will be off if the print server is connected to a 10BASE-T
Ethernet network.
 The lower LED is green: The Link/Activity LED will be green if the print server is connected to a
Ethernet network.
 The lower LED is off: The Link/Activity LED will be off if the print server is not connected to the
network.