beautypg.com

Ip address, Subnet mask, Ip address -5 subnet mask -5 – Brother MFC 8220 User Manual

Page 94

background image

FRONT PANEL SETUP MENU10 - 5

Running H/F 4

IP Address

This field displays the current IP address of the machine. If you have
selected a BOOT Method of STATIC, enter the IP address that you
wish to assign to the machine (check with your network manager for
the IP address to use). If you have selected a method other than
STATIC, the machine will attempt to determine its IP address using
the DHCP or BOOTP protocols. The default IP address of the
Brother network board in your machine will probably be incompatible
with the IP address numbering scheme of your network. We
recommend that you contact your network manager for an IP
address for the network the unit will be connected on.

1

Press

Menu

,

6

,

1

,

2

.

2

Select

1

to change —OR

2

to exit. Enter the IP address.

3

Press

Set

.

4

Press

Stop/Exit

.

Subnet Mask

This field displays the current subnet mask used by the machine. If
you are not using DHCP or BOOTP to obtain the subnet mask, enter
the desired subnet mask. Check with your network manager for the
subnet mask to use.

1

Press

Menu

,

6

,

1

,

3

.

2

Select

1

to change —OR

2

to exit. Enter the Subnet Mask

address.

3

Press

Set

.

4

Press

Stop/Exit

.

When the BOOT METHOD is set to “AUTO”, the machine
cannot receive IP address from a BOOTP server in
Windows

®

2000. So please ensure that you use DHCP for

Windows

®

2000 server.