Brother MFC 8220 - Manual (Page 79)

7 - 9 PRINTING FROM A MACINTOSH ®
NC9100h_FM6.0
How to Select the Print Server (TCP/IP)
After installing the PPD, use the following steps to select the printer driver:
1 Turn the power of the printer ON.
2 Open the Applications folder.
3 Open the Utilities folder.
4 Open the Print Center Icon.
5 Click the Add Printer button.
6 Select LPR Printers using IP.
7 Enter the TCP/IP address of the printer into the LPR Printer's
Address box.
Printing the configuration page will allow you to confirm the TCP/IP
address. For information on how to print the configuration page, see
Resetting the Print/Fax Sever back to factory settings (Test Switch)
on page 13-4.
8 If you are not using the default Queue enter the Queue name
you are using.
9 From the Printer Model pull-down list select your model.
10 Click Add and the printer will be available from the Printer List.