Brother HL-7050 - Manual (Page 2)

Safety Precautions
Warning
Note
To Use the Printer Safely
Warning Note Hint
User’s Guide
Network
User’s Guide
Indicates warnings that
must be observed to
prevent possible
personal injury. Indicates cautions that
must be observed to use
the printer properly or
prevent damage to the
printer. Indicates notes and
useful tips to remember
when using the printer. Indicates reference to the
User’s Guide or Network
User’s Guide which is on
the CD-ROM we have
supplied.
There are high voltage electrodes inside the printer.
Before replacing internal parts, cleaning the printer or
clearing a paper jam, make sure you have turned OFF
the power switch and unplugged the power cord from
the power outlet.
Do not handle the plug with wet hands. Doing this might
cause an electrical shock.
After you have just used the printer, some internal parts
of the printer are extremely hot. When you open the
front cover or rear cover of the printer, never touch the
shaded parts shown in the following illustration.
To prevent injuries, at least two people should lift the
printer, holding the handles on both the right and left
sides of the printer, and the front of the printer as
shown in the illustration.
Be careful not to trip on the legs of the optional
Stabilizer unit.
Do not stand on the printer or the optional stabilizer.
Inside the printer Open the face up output tray