Brother HL-7050 - Manual (Page 10)

8
1
Make sure that the printer power switch is
off.
Connect the AC power cord to the printer.
2
Plug the AC power cord into an AC outlet.
Turn the power switch on.
3
After the printer has finished warming up,
the
READY message appears.
4
Press the Go button. The printer prints a
test page.
Check that the test page has printed
correctly.
1
Press the + button until SETUP is
displayed.
Press the Set button.
2
Press the Set button again.
3
Press the
+
or
–
button to select your
language. Press the Set button to accept.
4 Print a Test Page
ON OFF
ON OFF
Extend the tray
extension flap
5
Setting Your Language
on the Control Panel
-- MENU --
SETUP
SETUP
LANGUAGE
LANGUAGE
=ENGLISH
*
Go to the next page
to install the driver.
Step 1