Brother MFC-885CW User Manual
Brother Multifunction Devices
STEP 1
STEP 2
Setup is Complete!
Qu
ick
Se
tu
p G
u
id
e
Installing the Driver & Software
MFC-885CW
Before you can use the machine, you must set up the hardware and install the software.
Please read this Quick Setup Guide for the correct setup procedure and installation instructions.
Keep this Quick Setup Guide, the User’s Guide and the supplied CD-ROM in a convenient place for
quick and easy reference at all times.
Table of contents
Document Outline
- Quick Setup Guide MFC-885CW
- Table of Contents
- Getting Started
- STEP 1 Setting Up the Machine
- 1 Removing the protective parts
- 2 Loading paper
- 3 Connecting the power cord and telephone line
- 4 Installing the ink cartridges
- 5 Print quality check
- 6 Choosing your language (Canada only)
- 7 Setting the LCD contrast
- 8 Setting the date and time
- 9 Setting your station ID
- 10 Setting tone or pulse dialing mode
- 11 Choosing a Receive Mode
- 12 Setting up the Message Center
- 13 Sending in the Product Registration and Test Sheet (USA only)
- 14 Installing the battery
- 15 Charging the battery
- 16 Setting your country on the cordless handset
- 17 Choosing your language on the cordless handset (Canada only)
- 18 Choosing a location
- 19 Positioning the antenna on the base unit
- STEP 2 Installing the Driver & Software
- Supplied CD-ROM ‘MFL-Pro Suite’
- Windows®
- For USB Interface Users (For Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista™)
- For Wired Network Interface Users (For Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista™)
- For Wireless Network Interface Users (For Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista™) in infrastructure mode
- Connecting your wireless machine and wireless network together and installing the printer driver in infrastructure mode
- Using the SecureEasySetup™ or AOSS™ software to configure your machine for a wireless network
- Using the Setup Wizard from the control panel LAN menu for wireless network configuration
- Installing FaceFilter Studio
- Macintosh®
- For USB Interface Users (For Mac OS® X 10.2.4 or greater)
- For Wired Network Interface Users (For Mac OS® X 10.2.4 or greater)
- For Wireless Network Interface Users (For Mac OS® X 10.2.4 or greater) in infrastructure mode
- Connecting your wireless machine and wireless network together and installing the printer driver in infrastructure mode
- Using the SecureEasySetup™ or AOSS™ software to configure your machine for a wireless network
- Using the Setup Wizard from the control panel LAN menu for wireless network configuration
- For Network Users
- Installing FaceFilter Studio Help
- Consumables
- brother USA/CAN