Brother MFC-885CW - Manual (Page 17)

Setting Up the Machine
15
12 Setting up the Message
Center
You must record an outgoing message in order to use
the Message Center mode.
1
Record the Message Center outgoing
message (Msg Ctr OGM).
See Outgoing message (OGM) in Chapter 9
of the User’s Guide.
2
Activate Message Center mode.
Press . The button will light when the mode
is active.
If the Message Center Mode is on, it
overrides your Receive Mode setting. The
built-in digital Message Center answers
voice calls. If the call is a fax, you can receive
a fax automatically. For details, see
Message Center in Chapter 9 of the User’s
Guide.
13 Sending in the Product
Registration and Test Sheet
(USA only)
1
Fill out the Product Registration and Test
Sheet.
2
Put the sheet face down in the ADF (Automatic
Document Feeder) or the scanner glass.
3
Make sure (Fax) is illuminated in
Green.
4
Enter the toll-free fax number: 1-877-268-9575.
5
Press Black Start.
Note
You will receive a confirmation fax of your Product
Registration.
You can also register your product online using the
On-Line Registration link from the installation
CD-ROM or visit
http://www.brother.com/registration.