Brother DCP-8040 - Manual (Page 172)

9 - 1 BROTHER NETWORK PC-FAX SOFTWARE
9
To use the MFC as a Network PC-FAX, the NC-9100h Network
board should be installed into the MFC (MFC-8840DN standard) and
configured with TCP/IP and mail server settings if you use Scan to
E-mail (E-mail server). (See Using Brother PC-FAX software on
page 6-1.)
Enable Network PC-FAX
To use the MFC for Network PC-FAX, see Using Brother PC-FAX
software on page 6-1.
Brother Network PC-FAX can be configured through PC-FAX Setup,
Sending tab.
Sending setup
In order to use the full functionality of Network PC-FAX it is strongly
recommended that you enable the Network PC-FAX Setup option on
the Sending tab Brother PC-FAX Setup.
1
Access the Sending Tab from the PC-FAX dialog box by
clicking
.
—OR—
From the Start menu, select All programs, Brother, MFL-Pro
Suite MFC-8840D, and then select PC-FAX Setup.
Brother Network PC-FAX
software
(For MFC-8440, MFC-8840D and MFC-8840DN only)
The items described below are specific items relating to the
Network version of PC-FAX software that is installed from the
"Optional network applications" on the CD-ROM supplied with
your MFC.