Brother PocketJet PJ-673 w WLAN - Manual (Page 6)

Chapter 1
2
Connecting the Printer
to External Power
1
Connecting to an AC Power
Outlet (Optional)
1
Connect the printer to a nearby AC power
outlet to power the printer or charge the
rechargeable battery using AC power.
a
Connect the AC adapter to the printer.
b
Connect the AC power cord to the AC
adapter.
c
Connect the AC power cord to a nearby
AC power outlet (100 - 240 VAC,
50 - 60 Hz).
1 AC adapter
2 AC power cord
NOTE
• The AC adapter and AC power cord are
optional accessories. When purchasing,
choose the adapter and power cord
appropriate for the region where the
printer will be used.
• When using the AC adapter, unwind the
bundled cord.
d
Hold down the printer's (Power)
button for about 1 second to turn the
printer on. The POWER indicator lights
in green, and the printer is in standby.
Connecting to a DC Power
Outlet (Optional)
1
Connect the printer to your vehicle’s 12 V DC
power outlet (cigarette lighter, etc.) to power
the printer or charge the rechargeable battery
using the vehicle’s DC power.
a
Connect the Car adapter to the vehicle’s
12 V DC power outlet.
b
Connect the Car adapter to the printer.
c
Start the vehicle, and then hold down
the printer’s (Power) button for about
1 second to turn it on.
The POWER indicator lights in green,
and the printer is in standby.
1 Car adapter
NOTE
• The Car adapter is an optional accessory.
• The voltage supplied by a vehicle
fluctuates. The printing speed may differ
depending on the supplied voltage.
• 24 V vehicles are incompatible.
1
2
1