Brother PocketJet PJ-673 w WLAN - Manual (Page 12)

Chapter 1
8
1 POWER indicator
2 Li-ion battery indicator
Charging While Removed From the
Printer
1
Use the AC adapter and AC power cord to
connect the rechargeable Li-ion battery to an
AC power outlet, or use the DC cable to
connect the battery to a DC power outlet.
The battery indicator lights in orange.
When the rechargeable Li-ion battery is fully
charged, the battery indicator turns off.
1 Li-ion battery indicator
Stopping Rechargeable Li-ion Battery
Charging
1
To stop rechargeable Li-ion battery charging,
disconnect the AC power cord or DC cable
from the battery’s AC/DC connector.
Tips on Using the
Rechargeable Li-ion Battery
1
 Charge the rechargeable Li-ion battery
immediately after purchase. Do not use it
before it is charged.
 Darker prints discharge the rechargeable
Li-ion battery faster than lighter prints.
Adjust the print density setting in the
printer driver’s dialog box (see Setting
Printer Driver Options on page 35) or in
PJ-673 Utility (see Print Density
on page 48).
 Unlike the rechargeable Ni-MH battery,
battery refreshing and trickle charging are
not necessary when using the
rechargeable Li-ion battery
 The rechargeable Li-ion battery charging
can take place in 32
F-104F (0C-40C)
environments. Charge the rechargeable
Li-ion battery in an environment in this
temperature range. If the surrounding
temperature is out of this range, the
rechargeable Li-ion battery will not be
charged, and the battery indicator will
remain lit.
If the temperature of the environment
returns to this range, recharging will
continue.
2
1
1