Brother MFC-J4610DW - Manual (Page 52)

Chapter 4
38
d
Enter the fax number.
Using the dial pad
Using (Address)
 Address Book
Using (History)
 Outgoing
 Incoming
e
Press Fax Start.
Faxing from the ADF
(MFC-J4410DW and
MFC-J4610DW)
4
 The machine starts scanning and
sending the document.
Faxing from the scanner glass
4
 If you choose Black in the
Color Setting (default setting),
the machine starts scanning the first
page. Go to step f.
 If you choose Color in the
Color Setting, the Touchscreen
asks if you want to send a color fax.
Press Color Fax to confirm. The
machine starts dialing and sending
the document.
f
When the Touchscreen asks you
Next Page?, do one of the following:
 To send a single page, press
No (Send).
The machine starts sending the
document.
 To send more than one page, press
Yes and go to step g.
g
Place the next page on the scanner
glass.
Press OK.
The machine starts scanning the page.
(Repeat steps f and g for each
additional page.)
Stop faxing
4
To stop faxing, press .
Setting scanner glass size
for faxing
4
When documents are A4 size, you need to
set the Scan Size to A4. If you do not, the
bottom portion of the faxes will be missing.
a
Load your document.
b
Press (Fax).
c
Press Options.
d
Press s or t on the Touchpanel to
display Glass Scan Size.
e
Press Glass Scan Size.
f
Press A4 (or Letter).
g
Press OK.
h
Enter the fax number.
i
Press Fax Start.
NOTE
• You can save the setting you use most
often by setting it as the default setting.
(See Advanced User’s Guide: Setting
your changes as the new default.)
• This setting is only available for sending
documents from the scanner glass.