Brother MFC-J245 - Manual (Page 15)

Sending a fax
11
3
Real Time Transmission
3
When you are sending a fax, the machine will
scan the document into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialing and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for the machine to scan it into
memory. You can set Real Time TX to On
for all documents or Next Fax Only for the
next fax only.
Sending in real time for all faxes
3
a
Press (FAX).
b
Press Menu, 3, 2, 3.
c
Press a or b to choose
Realtime TX:On or
Realtime TX:Off.
Press OK.
d
Press 2 so you can continue sending
your fax.
e
Load your document.
f
Enter the fax number.
g
Press Black Start or Color Start.
Sending in real time for the next fax
only
3
a
Press (FAX).
b
Press Menu, 3, 2, 3.
c
Press a or b to choose
Next Fax Only. Press OK.
d
Press a or b to choose Next Fax:Off
or Next Fax:On.
e
Press OK.
f
Press 2 so you can continue sending
your fax.
g
Load your document.
h
Enter the fax number.
i
Press Black Start or Color Start.
NOTE
• If you are sending a color fax or if the
memory is full and you are sending a black
& white fax from the ADF, the machine will
send the document in real time (even if
Real Time TX is set to Off).
• In Real Time Transmission, the automatic
redial feature does not work when you are
using the scanner glass.
• If the memory is full, faxes from the
scanner glass cannot be sent until you
clear some of the memory.
Overseas Mode
3
If you are having difficulty sending a fax
overseas due to possible interference on the
telephone line, we recommend that you turn
on Overseas Mode. After you send a fax
using this feature, the feature will turn itself
off.
a
Load your document.
b
Press (FAX).
c
Press Menu, 3, 2, 4.
d
Press a or b to choose On (or Off).
Press OK.
e
Press 2 so you can continue sending
your fax.
f
Enter the fax number.
g
Press Black Start or Color Start.