Brother MFC-665CW - Manual (Page 60)

Chapter 5
44
f
When you have finished, press
Stop/Exit.
Setting your changes as a
new default
5
You can save the fax settings for
Fax Resolution
, Contrast,
Real Time TX
and Scan Size you use
most often by setting them the default setting.
These settings will stay until you change
them again.
a
Press (Fax).
b
Press a or b to choose your new
setting.
Press OK.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press a
or b to choose Set New Default.
Press OK.
d
Press 1 to choose Yes.
e
Press Stop/Exit.
Restoring all the settings to
factory settings
5
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press (Fax).
b
Press a or b to choose
Factory Reset
.
Press OK.
c
Press 1 to choose Yes.
d
Press Stop/Exit.
Sending a fax manually
5
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
a
Press (Fax).
b
Load your document.
c
To listen for a dial tone do one of the
following:
„ (MFC-440CN) Press Hook or pick up
the handset of an external phone.
„ (MFC-665CW) Press
Speaker Phone or pick up the
handset.
„ (MFC-845CW) Press
Speaker Phone on the machine.
d
Dial using the machine’s dial pad.
e
When you hear the fax tone, press
Black Start or Color Start.
If you are using the scanner glass press
1 to send a fax.
f
If you picked up the machine’s handset,
or an external handset replace it.
Sending a fax at the end of a
conversation (MFC-440CN
and MFC-665CW only)
5
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Load your document.
c
Press Black Start or Color Start.
„ If you are using the scanner glass,
press 1 to send a fax.
d
Replace the handset.