Brother MFC-665CW - Manual (Page 169)

Troubleshooting and Routine Maintenance
153
b
Align the recessed arrows on the
bracket with those on the machine, and
then slide the bracket toward the front of
the machine until it clicks into place.
c
Make sure you plug the connector into
the jack (1) and route the cable through
the hook (2) as shown below.
d
Press the tab (1) and place the front of
the cradle in position.
e
Push the cradle down.
f
Route the AC power cord through the
guide on the side of the machine.
g
Plug the AC adapter into the AC power
outlet.
1 2
1