Brother PC-8500 8500D - Manual (Page 66)

63
Utility
Stitches
Characters
and
Decorative
Stitches
Embroidering
Editing
Embroidery
Patterns
Retrieving
My
Custom Stitch
TM
Maintenance
Error
Messages
Trouble
shooting
Sewing
Chart
Patterns
(Programmed
in Machine)
Patterns (Memory
Card)
Sewing
Setting Up
1. Touch the “ ” and “ ” stitch length setting keys and the
“ ” and “ ” stitch width setting keys to set the size of
the eyelet.
2. Attach presser foot “N”, check the needle drop point and
lower the presser foot, then start sewing.
1 Needle drop point
* The machine stops automatically after sewing a
reinforcement stitch.
* When automatic thread cutting is set, the machine trims
both threads automatically after sewing is completed.
3. Make a hole at the center with an eyelet punch.
EYELET STITCH
N
Stitch for making eyelet on belts, etc.
Size of eyelet (Actual size)
A B C
A– Large: 7.0 mm (5/16”)
B– Medium: 6.0 mm (1/4”)
C– Small: 5.0 mm (3/16”)