Order of one cycle sewing stretch fabrics, Order of one cycle, Sewing stretch fabrics – Brother PC-8500 8500D User Manual
Page 59
56
Maintenance
(Programmed
Order of one cycle
1
1
1
1
Reinforcement stitch
Sewing stretch fabrics
5
When sewing buttonholes onto stretch fabric, insert onto stretch
fabric, a gimp thread into the buttonhole seam (“
”
buttonholes only).
1. Hook the gimp thread onto the end of presser foot “A”, insert
it into the groove at the front of the presser foot and
temporarily tie it there.
1
Upper thread
2
Bobbin thread
5
2. Lower the presser foot and start sewing.
*
Set the stitch width to match the diameter of the gimp
thread.
3. Once sewing is completed, pull the gimp thread gently to
remove any slack, and trim any surplus length.
See also other documents in the category Brother Sewing machines:
- XL 2600i (82 pages)
- PE-770 (88 pages)
- PE-770 (40 pages)
- PE-770 (2 pages)
- SE-400 (16 pages)
- LS-2125i (2 pages)
- LS-2125i (67 pages)
- CS-6000i (68 pages)
- CS-6000i (2 pages)
- CE-5000PRW (68 pages)
- LX-3125 (96 pages)
- SE-400 (24 pages)
- 3034D (2 pages)
- 3034D (76 pages)
- HE 120 (183 pages)
- Innov-IS 500D (12 pages)
- CS-8060 (116 pages)
- CS 80 (115 pages)
- NX-400 (153 pages)
- PC-420 (153 pages)
- PC-210 210PRW (111 pages)
- NX-200 (111 pages)
- PC-210 210PRW (2 pages)
- Innov-IS 4000D (8 pages)
- Boutique 27 37 (111 pages)
- 2340CV (40 pages)
- 2340CV (21 pages)
- DS-120 (100 pages)
- PE-700II 750DUSB (40 pages)
- NX-2000 (88 pages)
- NX-2000 (2 pages)
- Innov-is 2200 (48 pages)
- NX-2000 (40 pages)
- 885-X08 (104 pages)
- PR-600 600C (20 pages)
- INNOVIS 500 (8 pages)
- PS-21 (46 pages)
- PC 6500 (140 pages)
- PE-750D (40 pages)
- XL-6061 (101 pages)
- XL-5051 (45 pages)
- BAS-326F-0 (81 pages)
- CS 100T (67 pages)
- EX 660 (67 pages)
- XL-5010 5020 5030 (82 pages)