Setting your changes as the new default, Restoring all settings to the factory settings, Sending a fax manually – Brother MFC-790CW User Manual
Page 59: Sending a fax at the end of a conversation, 5setting your changes as the new default

Sending a Fax
43
5
Setting your changes as the
new default
5
You can save the fax settings for
Fax Resolution
, Contrast,
Glass ScanSize
, Preview and
Real Time TX
you use most often by
setting them as default. These settings will
stay until you change them again.
a
Press (Fax).
b
Press d or c to choose your new setting
you want to change, and then press the
new option.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press
d
or c to display Set New Default.
d
Press Set New Default.
e
Press Yes.
f
Press Stop/Exit.
Restoring all settings to the
factory settings
5
You can restore all the settings you have
changed to the factory settings. These
settings will stay until you change them again.
a
Press (Fax).
b
Press d or c to display
Factory Reset
.
c
Press Factory Reset.
d
Press Yes.
e
Press Stop/Exit.
Sending a fax manually
5
Manual transmission lets you hear the
dialing, ringing and fax-receiving tones while
sending a fax.
a
Press (Fax).
b
Load your document.
c
To listen for a dial tone do one of the
following:
(MFC-790CW) Press
Speaker Phone
or pick up the
handset.
(MFC-990CW) Press
Speaker Phone
on the machine or
press (Talk) on the
cordless handset.
d
Dial the fax number using the dial pad.
e
When you hear the fax tone, press
Black Start
or Color Start.
If you are using the scanner glass
press Send to send the fax.
f
Replace the handset.
Sending a fax at the end of a
conversation
5
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a
Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b
Load your document.
c
Press Black Start or Color Start.
If you are using the scanner glass,
press Send to send the fax.
d
Replace the handset.