Brother MFC-790CW - Manual (Page 43)

General setup
27
3
Beeper Volume
3
When the beeper is on, the machine will beep
when you press a key, make a mistake or
after you send or receive a fax.
You can choose a range of volume levels,
from High to Off.
a
Press MENU.
b
Press a or b to display
General Setup
.
c
Press General Setup.
d
Press a or b to display Volume.
e
Press Volume.
f
Press a or b to display Beeper.
g
Press Beeper.
h
Press Low, Med, High or Off.
i
Press Stop/Exit.
Speaker Volume
3
You can choose a range of speaker volume
levels, from High to Off.
a
Press MENU.
b
Press a or b to display
General Setup
.
c
Press General Setup.
d
Press a or b to display Volume.
e
Press Volume.
f
Press a or b to display Speaker.
g
Press Speaker.
h
Press Low, Med, High or Off.
i
Press Stop/Exit.
You can also adjust the speaker volume by
pressing Speaker Phone.
a
Press Speaker Phone.
b
Press d or c to display Volume.
c
Press Volume.
d
Press d or c.
This setting will stay until you change it
again.
e
Press Speaker Phone.
Note
• You can adjust the speaker volume while
you are listening to your outgoing
message (OGM) and incoming messages
(ICM’s) by pressing d or c.
• If you turn Incoming Recording Monitor to
OFF the Speaker for screening calls will
be disabled and you won’t hear callers
leaving messages. The volume for other
operations can still be controlled using
d
or c.